(1)Usage:
Excellent bonding strength for rubber, plastic, wood, leather, paper, cloth, glass, plywood, fireproof board, cement, metal, etc. while poor for soft silicon rubber such as PVC, PE, PP.
(2)Directions:
On the surface, all the water, oil, dirt, dust, rust, release agent and other obstacles must be cleaned up before using.
Coating evenly on both surfaces with tooth scraper.
On porous surface such as wood, the capacity is about 200-300 g/m2, and others such as metal, 150-200g/m2. 2-3 times are better for surfaces such as canvas.
Place under ordinary temperature for 5-45min and naturally airing, and then press to bond from the middle to the edge to discharge air. Hammer on the edge.
The proper time between coating and bonding is 5-45min in summer, and 5-20 in winter.
(3)Caution:
The best bonding time is when the solvent is of slight stickiness, but not sticky to hand.
More universal the surface, stronger the pressure, and better the bonding strength.
No smoking and fire when using because of the organic solvent contained, and keep air circulation. Avoid storing in high temperature.
The bonding strength would be reduced by the water vapor in the damp and cold air. If needed, Please use heating equipment.
Avoid touching with solvent such as toluene to prevent from dissolution or expansion.
Please seal save after using. If viscosity rises, please add proper amount of toluene, fully mix and dilute.
(4)Storage life:24 months